P Singh, S Sharma, K Kumar, G Iyer, A Kumar, "A Comparative Study on Mechanical Properties of Yttrium Oxide and Reduced Graphene Oxide Reinforced Epoxy Nanocomposites" , Journal of Materials Engineering and Performance (JMEP) Volume :In Press / 1-11 / 2024

---

Nikunj Patel, Gaurav Mittal, Mitushi Agrawal, Ajaya Kumar Pradhan, "Aluminum foam production, properties, and applications: a review" , International Journal of Metalcasting Volume :18 / 2181-2198 / 2024

---

Ritesh Gupta2, Gaurav Mittal, Krishna Kumar, Upender Pandel, "Analysing the shape memory behaviour of GnP-enhanced nanocomposites: a comparative study between experimental and finite element analysis" , Modelling and Simulation in Materials Science and Engineering Volume :32 / / 2024

---

Ritesh Gupta, Gaurav Mittal, Krishna Kumar and Upender Pandel, "Analysing the Shape Memory Behaviour of MWCNT-Enhanced Nanocomposites: A Comparative Study between Experimental and Finite Element Analysis" , Functional Composites and Structures Volume :4 / / 2024

---

Nilesh Tiwari, Aakif Anjum, Kakif Markad, Ritesh Gupta, Krishna Kumar, "Assessment of structural irregularities in piezoelectric-embedded laminated composites" , International Journal on Interactive Design and Manufacturing Volume :1 / 1-32 / 2024

---

R K Saini, U Pandel, Vijay N Nadakuduru , "Characterization of AlCoCrFeMg high-entropy alloy synthesized using a combination of mechanical alloying and hot pressing" , Trans Indian Inst Met Volume :0 / / 2024

---

Ritesh Gupta, Gaurav Mittal, Gajendra Kumar Nhaichaniya, Krishna Kumar, Upender Pandel, "Comparative study on shape memory, mechanical, and thermomechanical properties of multi-walled carbon nanotubes and graphene nanoplatelets modified bidirectional (twill) carbon fiber polymer composite" , journal of applied polymer science Volume :56233 / 1-16 / 2024

---

V. S. Darekar and R. K. Goyal, "Development of single-layered radar-absorbing material composed of graphene nanoplatelets-reinforced glass fabric/epoxy hybrid composites for X-band" , Journal of Materials Science: Materials in Electronics Volume :35 / 1167 / 2024

---

Banti Chauhan, Vijay Navaratna Nadakuduru, Brij Mohan Mundotiya , "Effect of Ag content on the friction and wear properties of electrodeposited self-lubricating Ni�Ag coating" , Tribology - Materials, Surfaces & Interfaces Volume :18(2) / 124-132 / 2024

---

Mitushi Agrawal, Gaurav Mittal, Nikunj Patel, Ajaya Kumar Pradhan, "Effect of Aging Heat Treatment on Microstructure and Properties of Al�Cu�Mg Alloy" , Metallography, Microstructure, and Analysis Volume :00 / / 2024

---

Nikunj Patel, Mohit Joshi, Abhishek Singh, Gaurav Nandkishore Mittal, Mitushi Agrawal, Sunil Manani, Ajaya Kumar Pradhan , "Effect of Solution Heat Treatment (Temperature and Time) on Microstructure and Properties of Al�Cu�Mg Alloy" , International Journal of Metalcasting Volume :00 / 1151-1159 / 2024

---

Premlata Rao, Sujata Singh, Krishna Kumar, Upender Pandel, Chandan Srivastava, "Electrochemical Behavior and Surface Chemistry Studies of Electrodeposited MnMoCrCoFeNiCu High Entropy Alloy-Carbon Nanotube Composite Coatings" , Journal of Materials Engineering and Performance Volume :5 / 1-16 / 2024

---

Mansha Mohan, Sujata Singh, Upender Pandel, Krishna Kumar, Chandan Srivastava, "Evolution of surface oxide chemistry and its effect on the electrochemical degradation behaviour of AlCoFeCuNi high entropy alloy coating incorporated with multiwalled carbon nanotubes" , Electrochimica Acta Volume :485 / 144095 / 2024

---

Nidhi Sindhu, Rajendra Kumar Goyal, V.M. Sreekumar, "Formation, dispersion and distribution of TiB2 particles in in-situ Al-TiB2 functionally graded nanocomposites" , Metallurgical and Materials Transactions A Volume :55 / 1654-1672 / 2024

---

Banti Chauhan, Vijay Navaratna Nadakuduru, Brij Mohan Mundotiya, "Friction and wear characteristics of electrodeposited Ni-based metallic coatings on Cu-substrate under high-temperature conditions" , Advanced Engineering Materials Volume :0 / / 2024

---

Ravindra Singh Shekhawat, Vijay Navaratna Nadakuduru, "Friction Stir Spot Welding and characterization of Bulk Aluminum Alloy 6061 Synthesized Using Powder Metallurgical Route (Accepted)" , Powder Metallurgy and Metal Ceramics Volume :00 / / 2024

---

Boya Venugopal, Ravi Mudike, Ranjith Ravi, Prasanta Kumar Sahoo, Abhishek Tripathi, Indrajit Shown, "Harnessing Enhanced Stability and High-Rate Capability in Lithium-Ion Batteries using Synergistic SnS2/MoS2 2D Nanostructures with Optimized Conversion/Alloying Reactions" , Journal of Alloys and Compounds Volume :984 / 173886 / 2024

---

Mrigesh N Verma, Vijay N Nadakuduru, "Hot forging of induction sintered Ti-46Al-1B (at%) alloy synthesized via powder metallurgy route" , Journal of Materials Engineering and Performance (JMEP) Volume :0 / / 2024

---

Sunil Manani, Mukesh Kumar, Patel Nikunj, Ajaya Kumar Pradhan, "Impact of Melt Thermal Treatment and Artificial Aging on Microstructure and Mechanical Properties of A356 Alloy" , Metallography, Microstructure, and Analysis Volume :00 / / 2024

---

Nikunj Patel, Sunil Manani, Ajaya Kumar Pradhan, "Influence of Copper Addition on Microstructure, Mechanical and Thermal Properties of Al�12.6% Zn�Mg Alloys" , International Journal of Metalcasting Volume :18 / 2624-2632 / 2024

---

Vijay T. Gaikwad, M. K. Mishra, R. K. P. Singh , "Influence of post-weld heat treatment on microstructure and corrosion behavior of dissimilar friction welded joint of IN713LC superalloy and AISI 4140 steel" , Metallography, Microstructure, and Analysis Volume :13 / 400-409 / 2024

---

Akash Sharma, Krishan Kumawat, Pawan Singh Birda, and Jyotirmaya Kar, "Influence of RSW Process Parameters on Microstructure and Mechanical Properties of Interstitial Free Steel Joints" , Journal of Materials Engineering and Performance Volume :0 / / 2024

---

Mansha Mohan, Sujata Singh, Krishna Kumar, Upender Pandel , "Infuence of Heat Treatment on Microstructural, Corrosion and Tribological Behaviour of Electrodeposited AlCoFeMnNiCu High Entropy Alloy Coatings" , Journal of The Institution of Engineers (India): Series D Volume :1 / / 2024

---

R. K. Singh, S. Paswan, "Isothermal High-Temperature Oxidation Behaviour of Nickel-Based Superalloy IN740H" , Trans Indian Inst Met Volume :NA / / 2024

---

Nikunj Patel, Ajaya Kumar Pradhan, "Mechanical Properties, Thermal Properties and Microstructure of Heat-Treated Al-Zn-Mg-x%Cu (0.02 wt% Cu and 0.89 wt% Cu) Alloy" , International Journal of Metalcasting Volume :00 / 1-11 / 2024

---

Suraj Prasad, S Sharma, Chintham Satish, Pushpender Singh, Satish Indupuri, P Sai Kiran, Niranjan Pandit, Shailesh Mani Pandey, Anup Kumar Keshri, "Microstructural, mechanical, room, and high temperature tribological properties of graphene oxide reinforced plasma sprayed alumina nanocomposite coatings" , Journal of Materials Research Volume :in press / 1-15 / 2024

---

V.T. Gaikwad, I. Balasundar, A. Tripathi, R.K.P. Singh, M.K. Mishra, "Microstructure evolution and mechanical properties of friction welded IN713LC and AISI 4140" , Materials Science and Technology Volume :. / 1-12 / 2024

---

R. D. Gadve and R. K. Goyal, "Morphology and electrical conductivity of carbon-coated nickel reinforced high-performance polymer nanocomposites" , Nanotechnology Volume :35 / 335205 / 2024

---

Bibhuti B. Sahoo, Prasanta K. Sahoo, Vijayabhaskara Bhaviripudi, Krushna C. Sahu, Abhishek Tripathi, N. K. Sahoo, R. Aepuru, Vishwajit M. Gaikwad, Srikant Sahoo, A.K. Satpati, and Chuan-Pei Lee, "Multifunctional Dy2NiMnO6/Reduced Graphene Oxide Nano composites and Their Catalytic, Electromagnetic Shielding, and Electrochemical Properties" , ACS Omega Volume :9 / 4600-4612 / 2024

---

Abhishek Tripathi, Asim Tewari, "On the experimental and numerical investigation of friction stir processing under varying cooling medium" , Materials Science and Technology Volume :. / 1-10 / 2024

---

Vijay T. Gaikwad, M. K. Mishra, Abhishek Tripathi, R. K. P. Singh, "On the role of upset pressure during friction welding of IN713LC and AISI 4140 " , Materials Science and Technology Volume :0 / 1-9 / 2024

---

V.T. Gaikwad, M.K. Mishra, Abhishek Tripathi, R.K.P Singh, "On the role of upset pressure during friction welding of IN713LC and AISI 4140" , Materials Science and Technology Volume :. / / 2024

---

Mansha Mohan, Sujata Singh, Upender Pandel, Krishna Kumar, Chandan Srivastava, "Optimization of surface oxide chemistry for enhanced corrosion resistance of AlMnFeCoNi � Carbon nanotube composite coatings" , Journal of Alloys and Compounds Volume :1003 / 175766 / 2024

---

Mansha Mohan, Upender Pandel, Krishna Kumar, "Phase composition, surface chemistry and electrochemical studies of electrodeposited AlMnFeCuNi high entropy alloy composite coatings incorporated with carbon nanotubes" , Materials Research Express Volume :11 / 1-29 / 2024

---

R. K. Goyal, "Poly (ether-sulfone)/MWCNT nanocomposites manufactured by powder metallurgy route and their dynamic mechanical properties" , Nanotechnology Volume :35 / 155702 / 2024

---

V. S. Darekar, M. G. Kulthe, A. Goyal, R. K. Goyal, "Rice Husk Ash: Effective Reinforcement for Epoxy-Based Composites for Electronic Applications" , Journal of Electronic Materials Volume :53 / 1344-1359 / 2024

---

Ritesh Gupta, Nilesh Tiwari, Krishna Kumar, Upender Pandel, "Shape memory, mechanical and thermomechanical property comparison in MWCNT and GnP modified Bi-directional (plain) carbon fiber polymer composites" , Polymer Composites Volume :1 / 1-22 / 2024

---

Ishwar Sharma, K. V. K. Adari, Lokesh Biddika, Kunal Borse, "Synthesis and characterization of water-based CIGS ink for photovoltaic applications" , Discover Materials Volume :4 / 76 / 2024

---

V. S. Darekar, R. D. Gadve and R. K. Goyal, "Transforming agriculture waste into useful filler for a sustainable epoxy-glass fabric composites: microwave absorbing applications" , Journal of Materials Science: Materials in Electronics Volume :35 / 1911 / 2024

---

Banti Chauhan, Vijay Navaratna Nadakuduru and Brij Mohan Mundotiya, "Tribology - Materials, Surfaces & Interfaces" , Tribology - Materials, Surfaces & Interfaces Volume :00 / 1 / 2024

---

M. Kumar, R. K. Goyal, S. Sharma, "Viscoelastic behaviour of poly (ether-ketone)/fly ash composites fabricated by powder metallurgical route" , High Performance Polymers Volume :36 / 130-140 / 2024

---

Pooja Singh, Swati Sharma, Kaushal Kumar, Ganesh Iyer, Sohan Lal, Arun Kumar, "Viscoelastic behaviour of yttrium oxide and reduced graphene oxide embedded epoxy nanocomposite" , Engineering Research Express Volume :6 (2) / 025522 / 2024

---

N. K. Sahu, R. K. Naik, D. Panda, S. K. Sahoo, P. K. Kar, S. K. Badjena , "Weld Morphology and Corrosion Characteristics of Flux-Assisted Gas Tungsten Arc-Welded Super Duplex Stainless Steel" , Journal of Materials Engineering and Performance (JMEP) Volume :- / / 2024

---

M. Kumar, A. Kumar, R. K. Goyal, S. Sharma, "A novel approach of fabricating low-cost high temperature printed circuit board substrate based on poly (ether-ketone)/fly ash composites" , Journal of Materials Science: Materials in Electronics Volume :34 / 1238 / 2023

---

Gaur, Atirek, Upender Pandel, and Swati Sharma, "A study of investigating the effects of variables and assessing the efficiency of air plasma spray as a coating technique" , Materials Today: Proceedings Volume :in press / / 2023

---

M. Joshi, R. Gadve, G. Upadhyay, R. K. Goyal, "Coefficient of thermal expansion and thermal conductivity of poly (ether-ketone)�silica nanocomposites for electronic packaging substrate" , Journal of Materials Science: Materials in Electronics Volume :34 / 2276 / 2023

---

Prasanta Kumar Sahoo, Niraj Kumar, Abhishek Tripathi, "Direct growth of hierarchically SnS2 layered nanostructure on nickel foam for high-performance solid-state supercapacitors" , Materials Today: Proceedings Volume :74 / 730-735 / 2023

---

Nikunj Patel, Sunil Manani, Ajaya Kumar Pradhan, "Effect of Addition of Cu on Microstructure and Some Properties of 5754 Aluminum Alloy" , Transactions of the Indian Institute of Metals Volume :76 / 1929�1936 / 2023

---

A. Kumari, A. Kumar, R. Dawn, J. Roy, S. Jena, R. Vinjamuri, D. Panda, S. K. Sahoo, and V. R. Singh, "Effect of Annealing Temperature on the Structural, Electronic and Magnetic Properties of Co doped TiO2 Nanoparticles: An Investigation by Synchrotron-Based Experimental Techniques" , Journal of Alloys and Compounds Volume :933 / 167739 / 2023 ISBN: 9258388

---

Sandeep Mahore, Swati Sharma, Ipsita Priyadarshini, Prasanta Kumar Sahoo, Abhishek Tripathi, "Effect of cold rolling and annealing on the microstructure evolution of titanium alloy grade 2" , Materials Today: Proceedings Volume :in press / / 2023

---

Sunil Manani, Nikunj Patel, Ajaya Kumar Pradhan, "Effect of Modified Casting Process on Toughness and Wear Resistance of LM25 Alloy" , Transactions of the Indian Institute of Metals Volume :76 / 1095�1102 / 2023

---

Jyotirmaya Kar, "Effect of process parameters on porosities in electron beam welded AA-6061 to AA-2024 dissimilar joints" , Welding in the World Volume :67 / 2007-2016 / 2023

---

Nikunj Patel, Mohit Joshi, Abhishek Singh, Ajaya Kumar Pradhan, "Effect of Solution Heat Treatment on Microstructure and some Properties of Al�Cu�Mg Alloy" , Transactions of the Indian Institute of Metals Volume :76 / 2681�2689 / 2023

---

K Vamsi Krishna, Sriharitha Rowthu, Vijay N Nadakuduru, Ganesh Pilla, N Kishore Babu, "Effect of Welding Speed and Post Weld Heat Treatment on Microstructural Characterization and Mechanical Properties of Gas Tungsten Arc Welded Ti-15V-3Al-3Cr-3Sn Joints" , Fusion Science and Technology Volume :00 / / 2023

---

Umesh Somaji Waware, Ab Qayoom Mir, Roshan Nazir, AMS Hamouda, Ajaya Kumar Pradhan, "Electrodepositvely Introducing Micro Particles of TiO2 in Ni�B Coatings and Its Effect on Physical Properties and Corrosion Performance of NiB Coatings" , Journal of Surface Investigation: X-ray, Synchrotron and Neutron Techniques Volume :17 / 1444�1451 / 2023

---

Nikunj Patel, Ajaya Kumar Pradhan, "Influence of Copper Addition on Microstructure, Mechanical and Thermal Properties of Al-Zn-Mg Alloys" , International Journal of Metalcasting Volume :00 / / 2023

---

I Sharma, H Gulupalli, S Thada, S Jain, RK Goyal, K Borse, "Low-temperature synthesis of lead-free Cs2AgBiBr6 double-perovskite ink" , Nanomaterials and Energy Volume :11 (3-4) / 80-84 / 2023 ISBN: 2045-9831

---

Atirek Gaur, Rahul Kumar, Pushpender Singh, Upender Pandel, Anup Kumar Keshri, Swati Sharma, "Mechanical and Tribological Behavior of Titanium and Cerium Oxide-Reinforced Plasma-Sprayed AlNiCoCrSi HEA Coatings" , Metallurgical and Materials Transactions A Volume :54 / 4757�4769 / 2023

---

Krishna, C. Gopi Krishna, Polamarasetty Nagendra, M.K. Talari, Vijay N. Nadakuduru, Nagumothu Kishore Babu, "Microstructural characterization and mechanical properties of metastable beta and alpha+ beta titanium alloy electron beam weldments, Fusion Science and Technology (Accepted)" , Fusion Science and Technology Volume :0 / / 2023

---

Shubhendra Shivam Maurya, Krishna Kant Pandey, Swati Sharma, Sudha Kumari, Kamlesh Kumar Mirche, Deepak Kumar, Shailesh Mani Pandey, Anup Kumar Keshri, "Microstructural, mechanical and tribological behavior of nanodiamonds reinforced plasma sprayed nickel-aluminum coating" , Diamond and Related Materials Volume :133 / 109714 / 2023

---

NK Singh, A Kumar, R Dawn, S Jena, A Kumari, VR Singh, M Zzaman, R Shahid, D Panda, SK Sahoo, UK Goutam, VK Verma, K Kumar, M Khatravath, A Priyamt, "Resonance Photoemission Spectroscopic Study of Thermally Evaporated NiTiO3 Thin Films" , Journal of Electronics Material Volume :52 / 669 / 2023 ISBN: 0361-5235

---

V.T. Gaikwad, M.K. Mishra, V.D. Hiwarkar, R.K.P. Singh , "Role of friction time on the joint characteristics of continuous drive friction welded Inconel 718 and EN24 steel" , Journal of Materials Engineering and Performance Volume :32 / 1660-1670 / 2023

---

Santosh, P. K. Sain, Aman Kabra, Nimu Chand Reger, Dhanraj Solanki, R. K. Goyal, A. K. Bhargava, "Tribological Behaviour of Silicon Nitride Reinforced Polycarbonate Nanocomposites" , Journal of Applied Polymer Science Volume :140 (18) / 53807 / 2023

---

Premlata Rao, Sujata Singh, Krishna Kumar, Upender Pandel, Chandan Srivastava, "Understanding the evolution of microstructure, phase homogeneity, electrochemical characteristics and surface chemistry of electrodeposited MnCrCoFeNiCu high entropy alloy coating with reinforcement o" , Surface and Coatings Technology Volume :471 / 129912 / 2023

---

R. D. Gadve, Y. Trivedi, V. K. Sangal, V. M. Sreekumar and R. K. Goyal, "Utilization of rice husk ash as an effective reinforcement in polyether sulfone-based composites for printed circuit board" , Journal of Materials Science: Materials in Electronics Volume :34 / 1953 / 2023

---

Jyotirmaya Kar, "X-ray tomography studies of electron beam welded Inconel-718 to AISI-316L dissimilar joints" , Transactions of the Indian Institute of Metals Volume :0 / / 2023

---

D. Panda, S. Tripathy, R. K. Sabat, S. Suwas, and S. K. Sahoo, "An investigation on the correlation between microstructure, texture and mechanical properties of Mg and its alloys" , Journal of Materials Engineering and Performance Volume :31 / 9183 / 2022 ISBN: 1059-9495

---

Brij Mohan Mundotiya, Dragan Dinulovic, Lutz Rissing, Marc Christopher Wurz, "Characterization of Microtransformers with Magnetic Ni-Fe-W alloy Cores Plated at Two Different Substrate Temperatures" , Sensors and Actuators A: Physical Volume :338 / 113454 / 2022

---

Sunil Manani, Aashendra Patodi, Mrigesh Navalkishor Verma, Ajaya Kumar Pradhan, "Comparative Study of Microstructure and Properties of Hypoeutectic Al-Si Alloys Being Cast With and Without Melt Thermal Treatment" , Metallography, Microstructure, and Analysis Volume :11 / 415�424 / 2022

---

M.G. Kulthe, R.K. Goyal, S.P. Butee, "Creep, recovery and dynamic mechanical properties of PEK/ MWCNT nanocomposites" , Materials Science and Engineering B Volume :282 / 115752 / 2022 ISBN: ISSN:0921-5107

---

Umesh Somaji Waware, Roshan Nazir, AMS Hamouda, Ajaya Kumar Pradhan, "Effect of addition of Pd on electrodeposited Ni�B coatings" , The European Physical Journal Plus Volume :137 / 744 / 2022

---

Jyotirmaya Kar, K. Guguloth, "Effect of beam oscillation on creep properties of electron beam welded AISI 316L stainless steel" , Metals and Materials International Volume :28 (2) / 503-513 / 2022

---

RK Rai, PSM Jena, N Paulose, JK Sahu , "Effect of carbide precipitation on Coffin-Manson relationship of a polycrystalline nickel-based superalloy" , Fatigue & Fracture of Engineering Materials & Structures Volume :17567002 / 17567002 / 2022

---

A. Singh, R. Dawn, V. K. Verma, D. Panda, S. K. Sahoo, K. Kumar, and V.R. Singh, "Electronic and magnetic properties of FeCr2O4 nanoparticles by advanced synchrotron based soft X-ray magnetic circular dichroism" , Physica B: Condensed Matter Volume :647 / 414373 / 2022 ISBN: 0921-4526

---

BG Gupta K, S Patnaik, BC Ray, RK Rai, RK Prusty , "Elevated temperature mechanical behavior of nano Al2O3 embedded interpenetrating polymer network/glass fiber composites" , Journal of Applied Polymer Science Volume :139 / 41 / 2022

---

Shramana Bhattacharya, Anup Anang Das, Ganesh Chandra Dhal, Prasanta Kumar Sahoo, Abhishek Tripathi, Naresh Kumar Sahoo, "Evaluation of N doped rGO-ZnO-CoPc(COOH)8 nanocomposite in cyanide degradation and its bactericidal activities" , Journal of Environmental Management Volume :302 / 114022 / 2022

---

Niraj Kumar, Bibhuti Bhusan Sahoo, Krushna Chandra Sahu, Naresh Kumar Sahoo, Brundabana Naik, Ankur Soam, Rahul Kumar, Abhishek Tripathi, Prasanta Kumar Sahoo, "Evolution of hierarchical petal-like 3D SnS2 as high-performance electrode materials for supercapacitor applications" , Materials Today: Proceedings Volume :67 / 1039-1042 / 2022

---

Suresh Bandi and Ajeet K. Srivastav, "Formation mechanism of nanocrystalline W derived cubic-H0.5WO3" , Scripta Materialia Volume :208 / 114363 / 2022

---

Ravi Ranjan Kumar, Randhir Kumar Singh, C.R. Anoop, Ranjan Das, S.V.S. Narayana Murty, K. Thomas Tharian, and A. Alex, "Influence of Filler Metal on the Microstructure and Mechanical Properties of 316Ti�15-5 PH Stainless Steel Weld Joints" , Journal of Materials Engineering and Performance Volume :-- / -- / 2022

---

Rahul Verma, Swati Sharma , Biswajyoti Mukherjee , Pushpender Singh , Aminul Islam , Anup Kumar Keshri, "Microstructural, mechanical and marine water tribological properties of plasma-sprayed graphene nanoplatelets reinforced Al2O3- 40 wt% TiO2 coating" , Journal of the European Ceramic Society Volume :42 / 2892-2904 / 2022 ISBN: 0955-2219

---

D. Panda, R. Kushwaha, R. K. Sabat, S. Suwas, and S. K. Sahoo, "Microstructure and texture evolution during grain growth of AM30 magnesium alloy" , Philosophical Magazine Volume :102 / 2207 / 2022 ISBN: 1478-6435

---

N. Sahu, D. Panda, S. K. Badjena, and S. K. Sahoo, "Multicomponent flux for improved penetration and metallurgical properties using A-GTAW" , Journal of Materials Engineering and Performance Volume :32 / 4237 / 2022 ISBN: 1059-9495

---

R. K. Goyal, R. Agrawal, and A. K. Bhargava, "Poly(ether-Ketone) (PEK)/ceramic Nanocomposites as Alternate Materials for Printed Circuit Board Application" , Polymer-Plastics Technology and Engineering Volume :61 / 471-481 / 2022 ISBN: 2574-0881

---

R.K. Rai, "Role of stacking fault on mechanical properties of a DS alloy" , Materials Science and Technology Volume :1-6 / / 2022

---

D. Panda, R. K. Sabat, S. Suwas, and S. K. Sahoo, "Role of temperature and precipitates on the evolution of microstructure and texture during grain growth of Mg�3Al�0.2Ce alloy" , Philosophical Magazine Volume :102 / 1091 / 2022 ISBN: 1478-6435

---

Pavan Bijalwan, Krishna Kant Pandey, Swati Sharma, Pushpender Singh, Atasi Dan, Atanu Banerjee, A.N.Bhagat, Anup Kumar Keshri, "Single-step approach to tune the wettability of plasma sprayed crystalline and amorphous Fe-based coating" , Surface and Interfaces Volume :30 / 1-12 / 2022

---

RK Rai, "Slip localization and Cr23C6 carbide formation during low cycle fatigue of a polycrystalline nickel-base superalloy" , Materials Chemistry and Physics Volume :291 / 126780 / 2022

---

S. N. Alam, P. Shrivastava, D. Panda, B. Gunale, K. Susmitha, and P. Pola, "Synthesis of Al2Cu Intermetallic Compound by Mechanical Alloying" , Materials Today Communications Volume :31 / 103267 / 2022 ISBN: 2352-4928

---

Rajesh Kumar Rai, and Chandan Srivastava., " "Synthesis and Mechanism of Formation of Non-equilibrium Ag–Ni Nanotubes"." , Metallography, Microstructure, and Analysis Volume :10 / 86-95 / 2021

---

Rai RK, Sahu JK, Paulose N, Fernando DC. , ""Tensile deformation micro-mechanisms of a polycrystalline nickel base superalloy: From jerky flow to softening."" , Materials Science and Engineering A Volume :21 / 807 / 2021

---

Rahul Sen, Upender Pandel, "Conceptual kinetic study for the catalytic effect of limestone on mill scale reduction by low grade coal" , Powder Technology Volume :378 / 510-520 / 2021

---

P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, "Development and mechanical properties investigation of Cu-MWCNT-graphite Nanoplatelets hybrid Nanocomposites" , Diamond and Related Materials Volume :117 / 108467 / 2021 ISBN: 1879-0062

---

Mohini Tiwari, Roshan D. Gadve and R. K. Goyal, "Effect of Bamboo-Like Carbon Nanotubes on Morphology, Electrical Properties and Thermal Conductivity of Poly(ether-Ketone) Matrix Nanocomposites" , Polymer-Plastics Technology and Engineering Volume :60 / 1292-1307 / 2021 ISBN: 2574-0881

---

Jyotirmaya Kar, "Effect of beam oscillation on residual stress and corrosion properties of AISI 316L electron beam welds" , Metallography, Microstructure, and Analysis Volume :10 (5) / 652-660 / 2021

---

Ravindra S Shekhawat, Vijay Nadakuduru, "Impact of Post Weld Heat Treatment on Mechanical and Microstructural Properties of Underwater Friction Stir Spot Welded 6061 Aluminium Alloy" , Materials Today: Proceedings, in Press Volume :000 / 0,0 / 2021 ISBN: 000

---

R. K. Goyal, Parikshit Tamhane and Siddhant Tambat, "Improvement in dielectric properties of the three-phase GN–BaTiO3–PEK nanocomposites with and without silane coupling agent" , Journal of Materials Science: Materials in Electronics Volume :32 / 28468-479 / 2021

---

Vijay Kumar Pandey, Sunil Kumar Jatav, Upender Pandel, Rajendra Kumar Duchaniya, "Influence of temperature on thermo physical properties of non-prototype material (CaO-Fe2O3, 21:79 by wt. %) for nuclear reactor" , Indian Journal of Engineering & Materials Sciences Volume :28 / 165-173 / 2021 ISBN: 0975-1017

---

A. M. Patki and R. K. Goyal, "Investigation of Non-Isothermal Crystallization, Dynamic Mechanical and Dielectric Properties of Poly(ether-Ketone) Matrix Composites " , Polymer-Plastics Technology and Engineering Volume :60 / 70-83 / 2021 ISBN: 2574-0881

---

V.T. Gaikwad, M.K. Mishra, V.D. Hiwarkar, R.K.P. Singh, "Microstructure and mechanical properties of friction welded carbon steel (EN24) and nickel based superalloy (IN718)" , International Journal of Minerals, Metallurgy and Materials Volume :28 / 111-119 / 2021

---

U.S. Waware, R. Nazir, A.Prasad, A.M.S.Hamouda, A.K. Pradhan, M. Alshehri, R. Syed, A. Malik, M.S. Alqahtan, "Preparation and properties of electrodeposited Ni-B-V2O5 composite coatings" , Surface & Coatings Technology Volume :409 / 126888 / 2021 ISBN: 0257-8972

---

C.R.Anoop, R.K.Singh, Ravi Ranjan Kumar, A. Prabhu, M.Jayalakshmi, S.V.S.Narayana Murty, and K.Thomas Tharian, "Review on Steels for Cryogenics Applications" , Materials Performance and Characterization Volume :10 / 16-88 / 2021

---

Suresh Bandi and Ajeet K. Srivastav, "Review: Oxygen-deficient tungsten oxides" , Journal of Materials Science Volume :56 / 6615 / 2021

---

C. Kumar, P.S.M. Jena, R.K. Singh, G.A. Harmain, J.K. Sahu, "Strain ratio effect on microstructural evolution during low cycle fatigue exploitation of nickel base superalloy IN 740H" , International Journal of Pressure Vessels and Piping Volume :194 / 1-10 / 2021

---

Nidhi Sindhu, Rajendra Kumar Goyal, Thankachan T. Pullan, Unnikrishnan, T.P.D. Rajan, Sreemanu, Sreekumar Vadakke Madam, "Study on Al/TiB2 functionally graded metal matrix composites" , Materials Today: Proceedings Volume :44 / 2945–295 / 2021

---

S. D. Bhosale, S. Gaikwad, R. D. Gadve and R. K. Goyal, "Synergistic Effects of Graphene Nanoplatelets on X-Band Electromagnetic Interference Shielding, Thermal Expansion and Thermal Stability of Poly(ether-ketone) Based Nanocomposites" , Materials Science & Engineering: B Volume :265 / 115038 / 2021 ISBN: ISSN:0921-5107

---

Swarnima Singh, Swati Sharma, Anup Kumar Keshri, "Tribological Behaviour of Plasma-Sprayed Graphene Nanoplatelets Reinforced Hydroxyapatite Nanocomposite Coating" , Transactions of the Indian Institute of Metals Volume :74 / 2901-2907 / 2021

---

Suresh Bandi and Ajeet K. Srivastav, "Understanding the growth mechanism of hematite nanoparticles: The role of maghemite as an intermediate phase" , Crystal Growth & Design Volume :21 / 16 / 2021

---

Suresh Bandi and Ajeet K. Srivastav, "Unraveling the growth mechanism of W18O49 nanowires on W surfaces" , CrystEngComm Volume :23 / 6559 / 2021

---

Suresh Bandi and Ajeet K. Srivastav, "Unveiling the crystallographic origin of mechanochemically induced monoclinic to triclinic phase transformation in WO3" , CrystEngComm Volume :23 / 1821 / 2021

---

Rahul Sen, Upender Pandel, "Closed crucible reduction of lump powdered mill scale or iron ore by coal: The sequential methodology and mechanism for optimization of process parameters" , Advanced Powder Technology Volume :31 / 3760-3773 / 2020

---

R.K. Duchaniya, U. Pandel, P. Rao, "Coatings based on high entropy alloys: An overview" , Materials Today: Proceedings Volume :44 / 4467�4473 / 2020

---

RK Rai, JK Sahu, SK Das, N Paulose, C Fernando, "Creep‐fatigue deformation micromechanisms of a directionally solidified nickel‐base superalloy at 850° C " , Fatigue & Fracture of Engineering Materials & St Volume :43 / 51-62 / 2020

---

Suresh Bandi, Devthade Vidyasagar, Shaik Adil, Manish Kumar Singh, Joysurya Basu, and Ajeet K. Srivastav,, "Crystallite size induced bandgap tuning in WO3 derived from nanocrystalline tungsten" , Scripta Materialia Volume :176 / 47 / 2020

---

C.R. Anoop, R.K. Singh, Ravi Ranjan Kumar, M. Jayalakshmi, S.V.S. Narayana Murty, and K.Thomas Tharian, "Development and Validation of Processing Maps for Hot Deformation of Modified AISI 321 Austenitic Stainless Steel " , Materials Performance and Characterization Volume :9 / 150-169 / 2020

---

Pranjal Chauhan , Sushil Yebaji , Vijay N. Nadakuduru , T. Shanmugasundaram , "Development of a Novel Light Weight Al35Cr14Mg6Ti35V10 High Entropy Alloy Using Mechanical Alloying and Spark Plasma Sintering" , Journal of Alloys and Compounds Volume :820 / 153367 / 2020 ISBN: ISSN: 0925-8388

---

P. Shrivastava, S. N. Alam, D. Panda, S. K. Sahoo, T. Maity, and K. Biswas, "Effect of addition of multiwalled carbon nanotube/graphite nanoplatelets hybrid on the mechanical properties of aluminium" , Diamond and Related Materials Volume :104 / 107715 / 2020 ISBN: 1879-0062

---

Mukesh Kr Chowrasia Akshay Kumar M K Banerjee U Pandel, "Effect of Aging on Structure and Properties of a Transformation-Induced Plasticity Aided High-Manganese Steel" , Journal of Materials Engineering and Performance Volume :29 / 648–661 / 2020 ISBN: 1059-9495

---

Sunil Kumar. Jatav, Vijay K. Pandey, Parimal P. Kulkarni, Arun K. Nayak, Upender. Pandel and Rajendra K. Duchaniya, "Effect of Air-Quenching on Properties of CaO-Fe2O3 and CaO-B2O3 Simulant Materials for Nuclear Reactor" , Journal of Physics: Conference Series Volume :1455 / 1-7 / 2020 ISBN: 1742-6588

---

Vijay Kumar Pandey, Sunil Kumar Jatav, Upendra Pandel, Rajendra Kumar Duchaniya,, "Effect of composition of thermal stability and microstructural Behaviour of Non-prototype Material (Cao-Fe2O3)" , Mechanical Engineering and Sciences Volume :15 / / 2020

---

Vijay Kumar Pandey, Sunil K.Jatav, U.Pandel, Rajendra Kumar Duchaniya, "Effect of soaking time on properties of non-prototype material (CaO-Fe2O3; 21:79 by wt. %)" , Materials Today Volume :26 / 871-877 / 2020

---

M. G. Kulthe, R. K. Goyal and S. P. Butee, "Electrical, mechanical, and electromagnetic interference shielding properties of poly(ether-ketone)-MWCNT nanocomposites" , Journal of Materials Science: Materials in Electronics Volume :31 / 18085-95 / 2020 ISBN: ISSN 0957-4522

---

Premlata, Deepika Singh, Upender Pandel, Rajendra Kumar Duchaniya, "Graphene Oxide Reinforced High Entropy Alloy (CuNiFeCrMo-GO) Nanocomposite Coating Deposited by Electroless Coating Method on Mild Steel" , Materials Today: Proceedings Volume :28 / 2411-2417 / 2020

---

R Verma, M J Rathod and R K Goyal, "High electromagnetic interference shielding of poly(ether-sulfone)/ multi-walled carbon nanotube nanocomposites fabricated by an eco-friendly route" , Nanotechnology Volume :31 / 385702 / 2020

---

C.R. Anoop, R.K. Singh, Ravi Ranjan Kumar, M. Jayalakshmi, S.V.S. Narayana Murty, and K.Thomas Tharian, "Hot Deformation Studies and Optimisation of Hot Working Parameters in Custom 465® Martensitic Precipitation Hardenable Stainless Steel" , Materials Performance and Characterization Volume :9 / 170-187 / 2020

---

Vaibhav Bhavsar, Amol Gujar, Niketan Manthani, Nagaraj Patil, Vinayak Pawar, M. K. Mishra, Rajkumar Singh, "Influence of nitrocarburizing and post oxidation on surface characteristics, fatigue and corrosion fatigue behaviour of AISI 4330V steel" , Transactions of the Indian Institute of Metals Volume :73 / 2471-2479 / 2020

---

RK Rai, JK Sahu, N Paulose, C Fernando, "Low Cycle Fatigue Behavior of a Directionally Solidified Nickel-Based Superalloy: Mechanistic and Microstructural Aspect " , Metallurgical and Materials Transactions Volume :2020 / 1-14 / 2020

---

Vijay Kumar Pandey , Sunil Kumar Jatav , U.Pandel , R.K.Duchaniya, "Microstructural Analysis of CaO-Fe2O3 Heat Treated at Different Temperature" , Journal of Physics: conference Series Volume :1455 / 1-5 / 2020 ISBN: 1742-6588

---

Ajeet K. Srivastav, Suresh Bandi, Abhishek Kumar, and B.S. Murty, "Microstructure evolution and densification during spark plasma sintering of nanocrystalline W-5wt.%Ta alloy" , Philosophical Magazine Letters Volume :100 / 442 / 2020

---

Ravindra S Shekhawat, Vijay N Nadakuduru, Kishore B Nagumothu, "Microstructures and Mechanical Properties of Friction Stir Spot Welded Al 6061 Alloy Lap Joint Welded in Air and Water" , Materials Today: Proceedings Volume :00 / 0,0 / 2020 ISBN: In Press

---

Sampada Viraj Dravid, Shubham Dinkar Bhosale, Suwarna Datar and R. K. Goyal, "Nickel Nanoparticle-Filled High-Performance Polymeric Nanocomposites for EMI Shielding Applications" , Journal of Electronic Materials Volume :49 / 1630-1637 / 2020 ISBN: ISSN 0361-5235

---

S.K. Dinda, Jyotirmaya Kar, G.G. Roy, W. Kockelmann, P. Srirangam, "Texture mapping in electron beam welded dissimilar copper-stainless steel joints by neutron diffraction" , Vacuum Volume :181 / 109668 / 2020

---

Lokesh Verma, M Bhanu chandar, Vijay N. Nadakuduru, Shanmugasundaram. T, T. Mahesh Kumar, Mrigesh Verma, "The possibility of synthesizing an Al-based bulk metallic glass using Powder Metallurgy Route" , Materials Today: Proceedings Volume :00 / 0,0 / 2020 ISBN: In Press

---

Sunil Kumar Jatav, Vijay Kumar Pandey, U Pandel, A K Nayak, Rajendra Kumar Duchaniya , "Thermo-physical Properties of CaO-Fe2O3 (26:74 by wt.%) Binary Mixture and Its Application in the Field of Nuclear Severe Accident Management" , International Journal of Scientific & Technology Research Volume :9 / 5773-5778 / 2020 ISBN: 2277-8616

---

Sunil Kumar Jatav, Vijay Kumar Pandey, U. Pandel, A. K. Nayak, Rajendra Kumar Duchaniya, "Thermo-physical properties of CaO-Fe2O3 binary mixture and its application in the field of nuclear reactor as simulant material" , International Journal of Engineering and Advanced Technology Volume :9 / 1706-1709 / 2020 ISBN: 2249-8958

---

Suresh Bandi, N. Naga Suresh, Toshali Bhoyar, and Ajeet K. Srivastav, "WO3.1/3H2O nanorods/nanoplates: Growth mechanism and CO2 uptake" , Materialia Volume :14 / 10093 / 2020

---

Ravindra Singh, Amrita Chakravarty, Shubhankar Mishra, Ramesh C. Prajapati, Jit Dutta, Inder K. Bhat, Upender Pandel, Sampad K. Biswas, and Kuttanellore Muraleedharan, "AlN–SWCNT Metacomposites Having Tunable Negative Permittivity in Radio and Microwave Frequencies" , ACS Appl. Mater. Interfaces Volume :11 / 48212-4822 / 2019 ISBN: 51

---

F. Hijazi, Jyotirmaya Kar, A.H.V. Pavan, K. Singh, P. Kumar, V. Jayaram,, "Application of bending creep for examining effect of service conditions on creep response of steel" , Materials Science and Engineering: A Volume :766 / 138398 / 2019

---

Jyotirmaya Kar, S.K. Roy, G.G. Roy, "Beam oscillation, porosity formation and fatigue properties of electron beam welded Ti-6Al-4V alloy" , Journal of Materials Processing Technology Volume :266 / 165-172 / 2019

---

RK Rai, JK Sahu, A Pramanick, N Paulose, DC Fernando, SK Das , "Creep deformation micro-mechanisms of CM 247 DS LC Ni-base superalloy under relevant service condition" , Materials Characterization Volume :150 / 155-165 / 2019

---

RK Rai, JK Sahu, SK Das, N Paulose, DC Fernando, C Srivastava, "Cyclic plastic deformation behaviour of a directionally solidified nickel base superalloy at 850° C: Damage micromechanisms" , Materials Characterization Volume :141 / 120-128 / 2019

---

S. Kumar, A. Patnaik, A.K. Pradhan and V. Kumar, "Dry sliding wear behavior of Al0.4FeCrNiCox (x = 0, 0.25, 0.5, 1.0 mol) high-entropy alloys" , Metallography, Microstructure, and Analysis Volume :8 / 545-557 / 2019 ISBN: 2192-9270

---

S. D. Gaikwad, S. V. Dravid, B. U. Sonawane, M. Abraham, R. K. Goyal, "Dynamic Mechanical and Creep Properties of Poly (Ether Ketone)-Graphite Nanoplatelet (GNP) Nanocomposites" , Polymer-Plastics Technology and Materials Volume :58 / 1691-1701 / 2019 ISBN: ISSN: 2574-0881

---

S.K. Dinda, Jyotirmaya Kar, S. Jana, G.G. Roy, P. Srirangam, "Effect of beam oscillation on porosity and intermetallics of electron beam welded DP600-steel to Al 5754-alloy" , Journal of Materials Processing Technology Volume :265 / 191-200 / 2019

---

Girija Suresh, Pradyumna Kumar Parida, Suresh Bandi, S. Ningshen, "Effect of carbon content on the low temperature sensitization of 304L SS and its corrosion resistance in simulated ground water" , Materials Chemistry and Physics Volume :226 / 184 / 2019

---

S. Kumar, A. Patnaik, A.K. Pradhan and V. Kumar, "Effect of cobalt content on thermal, mechanical and microstructural properties of Al0.4FeCrNiCox (X = 0, 0.25, 0.5, 1.0 mol) high entropy alloys" , Journal of Materials Engineering and Performance Volume :28 / 4111-4119 / 2019 ISBN: 1544-1024

---

S. Kumar, P. Rani, A. Patnaik, A.K. Pradhan and V. Kumar, "Effect of cobalt content on wear behaviour of Al0.4FeCrNiCox (x = 0, 0.25, 0.5, 1.0 mol) high entropy alloys tested under demineralised water with and without 3.5% NaCl solution" , Materials Research Express Volume :6 / 086503 / 2019 ISBN: 2053-1591

---

A. Gupta, R. K. Goyal, "Electrical properties of polycarbonate/expanded graphite nanocomposites " , Journal of Applied Polymer Science Volume :136 / 47274 / 2019

---

Suresh Bandi, Syamsai Ravuri, D.R. Peshwe, and Ajeet K. Srivastav, "Graphene from discharged dry cell battery electrodes" , Journal of Hazardous Materials Volume :366 / 358 / 2019

---

Suresh Bandi, Vikram Hastak, Chokkakula L.P. Pavithra, Sanjay Kashyap, Dhananjay Kumar Singh, Suaib Luqman, D. R. Peshwe, and Ajeet K. Srivastav, "Graphene/chitosan-functionalized iron oxide nanoparticles for biomedical applications" , Journal of Materials Research Volume :34 / 3389 / 2019

---

A. M. Patki and R. K. Goyal, "High performance polyetherketone-hexagonal boron nitride nanocomposites for electronic applications" , Journal of Materials Science: Materials in Electronics Volume :30 / 3899-3908 / 2019

---

K Borse, R Sharma, D Gupta, A Yella, "High-Efficiency Organic Solar Cells With Solution Processable Non-Fullerene Acceptor as an Interlayer" , IEEE Journal of Photovoltaics Volume :9 / 1266-1272 / 2019

---

R.K. Singh, J.K. Sahu, "Influence of Hold Type and Duration on Cyclic Deformation Behaviour of IN740H" , Material Science and Technology Volume :35 / 488 - 499 / 2019

---

RK Rai, JK Sahu, "Mean-stress and oxidation effects on fatigue behaviour of CM 247 DS LC alloy " , MATERIALS SCIENCE AND TECHNOLOGY Volume :24 / 1743-2847 / 2019

---

Abhishek Tripathi, Stefan Zaefferer, "On the resolution of EBSD across atomic density and accelerating voltage with a particular focus on the light metal magnesium" , Ultramicroscopy Volume :207 / 112828 / 2019

---

A. M. Patki, A. A. Maharanwar, S. K. Harde, R. K. Goyal, "Polycarbonate–hexagonal boron nitride composites with better dielectric properties for electronic applications" , SN Applied Sciences Volume :1 / 775 / 2019 ISBN: ISSN: 2523-3971

---

S. Kumar, A. Patnaik, A.K. Pradhan and V. Kumar, "Room temperature wear study of Al0.4FeCrNiCox (x = 0, 0.25, 0.5, 1.0 mol) HEA under oil lubricating condition" , Journal of Materials Research Volume :34 / 841-853 / 2019 ISBN: 2044-5326

---

D. Panda, R. K. Sabat, S. Suwas, V. D. Hiwarkar, and S. K. Sahoo, "Texture weakening in pure magnesium during grain growth" , Philosophical Magazine Volume :99 / 1362 / 2019 ISBN: 1478-6435

---

R.K. Singh, J.K. Sahu, "Yield strength anomaly and dynamic strain ageing behaviour of recently developed advanced ultra-supercritical boiler grade nickel base superalloy IN740H" , Materials at High Temperatures Volume :36 / 220-231 / 2019

---

Vikram Hastak, Suresh Bandi, Sanjay Kashyap, Shilpi Singh, Suaib Luqman, Mangesh Lodhe, D.R. Peshwe, and Ajeet K. Srivastav, "Antioxidant efficacy of chitosan/graphene functionalized superparamagnetic iron oxide nanoparticles" , Journal of Materials Science: Materials in Medicine Volume :29 / 154 / 2018

---

R Sharma, V Gupta, H Lee, K Borse, R Datt, C Sharma, M Kumar, S Yoo, D Gupta, "Charge carrier dynamics in PffBT4T-2OD: PCBM organic solar cells" , Organic Electronics Volume :62 / 441-447 / 2018

---

U.S. Waware, A.M.S. Hamouda and A.K. Pradhan, "Effect of codeposition of mixed nanoparticles (V2O5 and ZrO2) on the structure and properties of Ni-B nanocomposite coating" , Journal of Alloys and Compounds Volume :752 / 253-259 / 2018 ISBN: 0925-8388

---

S. D. Gaikwad and R. K. Goyal, "Effect of manufacturing processes on percolation threshold and electrical conductivity of polymer/multi layers graphene nanocomposites" , Diamond and Related Materials Volume :85 / 13-17 / 2018

---

B. Bandi, S.K. Dinda, Jyotirmaya Kar, G.G. Roy, P. Srirangam, "Effect of weld parameters on porosity formation in electron beam welded Zircaloy-4 joints: X-ray tomography study" , Vacuum Volume :158 / 172–179 / 2018

---

Pratik Nimbalkar, Amit Korde and R. K. Goyal, "Electromagnetic Interference Shielding of Polycarbonate/GNP Nanocomposites in X-band" , Materials Chemistry and Physics Volume :206 / 251-258 / 2018

---

PSM Jena, RK Rai, JK Sahu, "Improvement of toughness of high chromium white cast iron: duplex ferritic-austenitic matrix" , Materials Science and Technology Volume :34 / 299-304 / 2018

---

Rahul Sen, Aditya Maan, Ujjwal Goyal, Aditi Birdhaniya, Upender Pandel, "In crucible reduction of mill scale by lean grade coal: Study of time, temperature and arrangement for optimum reduction conditions" , Materials Today: Proceedings Volume :5 / 7256-7263 / 2018

---

Suresh Bandi, Vikram Hastak, D.R. Peshwe, and Ajeet K. Srivastav, "In-situ TiO2/rGO nanocomposites for CO gas sensing" , Bulleting of Materials Science Volume :41 / 115 / 2018

---

Jyotirmaya Kar, S.K. Roy, G.G. Roy, "Influence of beam oscillation in electron beam welding of Ti–6Al–4V" , The International Journal of Advanced Manufacturing Technology Volume :94 / 4531-4541 / 2018

---

PSM Jena, JK Sahu, RK Rai, SK Das, RK Singh, "Influence of duplex ferritic-austenitic matrix on two body abrasive wear behaviour of high chromium white cast iron" , Wear Volume :406 / 140-148 / 2018

---

K Borse, R Sharma, D Gupta, A Yella, "Interface engineering through electron transport layer modification for high efficiency organic solar cells" , RSC Advances Volume :8 / 5984-5994 / 2018

---

P.S.M. Jena, R.K. Singh, L. Mahanta, S. Paswan, J.K. Sahu, "Low Cycle Fatigue Behaviour of Nickel Base Superalloy in 740H at 760°C: Influence of Fireside Corrosion Atmosphere" , International Journal of Fatigue Volume :116 / 623-633 / 2018

---

S. N. Alam, N. Sharma, D. Panda, A. Kumar, D. Sampenga, A.Sairam, V. Sarky, and MB Krupateja, "Mechanical milling of Al and synthesis of in-situ Al2O3 particles by mechanical alloying of Al-CuO system" , Journal of Alloys and Compounds Volume :753 / 799 / 2018 ISBN: 9258388

---

RK Rai, JK Sahu, "Mechanism of serrated flow in a cast nickel base superalloy" , Materials Letters Volume :210 / 298-300 / 2018

---

RK Rai, JK Sahu, PSM Jena, SK Das, N Paulose, DC Fernando, "Micromechanism of High-Temperature Tensile Deformation Behavior of a Directionally Solidified Nickel Base Superalloy" , Journal of Materials Engineering and Performance Volume :27 / 659-665 / 2018

---

M. K. Mishra, A. G. Rao, I. Balasundar, B. P. Kashyap, N. Prabhu, "On the microstructure evolution in friction stir processed 2507 super duplex stainless steel and its effect on tensile behaviour at ambient and elevated temperatures" , Materials Science and Engineering A Volume :719 / 82-92 / 2018

---

Ashok M raichur, Krishna Kumar, D. Neela Priya, B. Rajkumar, and B. Chakradhar, "Polymer Assisted Zerovalent Iron Nanoparticles for the Removal of Arsenic" , Journal of Chemistry and Chemical Sciences Volume :8(4) / 630-641 / 2018 ISBN: 2319-7625

---

RK Rai, JK Sahu, "Strength-ductility paradox in a directionally solidified nickel base superalloy" , Materials Letters Volume :220 / 90-93 / 2018

---

RK Rai, JK Sahu, "Substructural evolution in a directionally solidified nickel-base superalloy during relaxation fatigue tests at 850 C" , Materials Letters Volume :230 / 241-244 / 2018

---

Upender Pandel Krishna Kumar and M.K. Banerjee, "Synthesis & Characterization of Cobalt - Graphene Nano Composite By Mechanical Milling and Sonicated Exfoliation" , Nano Research & Applications Volume :4 / 35 / 2018 ISBN: 2471-9838

---

Krishna Kumar, "Synthesis & Characterization of Nickel Nanocrystal - Graphene Composite By Mechanical Milling and Sonicated Exfoliation" , Nano Research & Applications Volume :4 / 36 / 2018 ISBN: 2471-9838

---

S. Kumar, D. Kumar, O. maulik, A.K. Pradhan, V. Kumar and A. Patnaik, "Synthesis and air jet erosion study of AlxFe1.5CrMnNi0.5 (x=0.3, 0.5) high entropy alloys" , Metallurgical and Materials Transactions A Volume :49 / 5607-5618 / 2018 ISBN: 1073-5623

---

U.S. Waware, A.M.S. Hamouda, B. Bajaj, T. Borkar and A.K. Pradhan , "Synthesis and characterization of electrodeposited Ni-B-Tl2O3 composite coatings" , Journal of Alloys and Compounds Volume :769 / 353-359 / 2018 ISBN: 0925-8388

---

Jyotirmaya Kar, S.K. Dinda, S.K. Roy, G.G. Roy, P. Srirangam, "X-ray tomography study on porosity in electron beam welded dissimilar copper–304SS joints" , Vacuum Volume :149 / 200-206 / 2018

---

M. K. Mishra, I. Balasundar, A. G. Rao, B. P. Kashyap, N. Prabhu, " On the high temperature deformation behaviour of 2507 super duplex stainless steel" , Journal of Materials Engineering and Performance Volume :26 / 802-812 / 2017

---

Robin Gupta, Ashok Sharma, Upender Pandel, Lorenz Ratke, "COARSENING KINETICS IN Al ALLOY CAST THROUGH RAPID SLURRY FORMATION (RSF) PROCESS" , Acta Metallurgical Slovaca Volume :23 / / 2017

---

Jyotirmaya Kar, S.K. Roy, G.G. Roy, "Effect of beam oscillation on microstructure and mechanical properties of AISI-316L electron beam welds" , Metallurgical and Materials Transactions A Volume :48 / 1759–177 / 2017

---

Robin Gupta, Ashok Sharma, Upender Pandel, Lorenz Ratke, "Effect of heat treatment on microstructures and mechanical properties of A356 alloy cast through rapid slurry formation (RSF) process" , International Journal of Cast Metals Research Volume :30 / / 2017

---

Akshay Kumar , U. Pandel and M.K. Banerjee , "Effect of high energy ball milling on the structure of iron � multiwall carbon nanotubes (MWCNT) composite" , Advances in Material Research Volume :6 / / 2017

---

Anurag Hamilton, Ashok Sharma, Upender Pandel, "Effect of Impingement Angle on Erosion Resistance of HVOF sprayed WC-10Co-4Cr coating on CA6NM steel" , Key Engineering Materials Volume :751 / / 2017

---

Akshay kumar, U.Pandel and M.K. Banerjee, "Effect of Mechanical properties of Fe/MWCNT Nanocomposites after vary the weight present of MWCNTs prepared by high energy ball milling" , International journal of Engineering Technology, Management and Applied Sciences Volume :5 / / 2017

---

Vatsala Chaturvedi, Ashok Sharma and Upender Pandel, "Effect of mechanical vibrations on grain refinement of AZ91 Mg alloy" , Materials Research Express Volume :4 / / 2017

---

M.K. Mishra, G. Gunasekaran, A.G. Rao, B.P. Kashyap, N. Prabhu, "Effect of multipass friction stir processing on mechanical and corrosion properties of 2507 super duplex stainless steel" , Journal of Materials Engineering and Performance Volume :26 / 849-860 / 2017

---

Robin Gupta, Ashok Sharma, UpenderPandel, Lorenz Ratke, "Effect of stirring speed on microstructure of A356 alloy cast through rheometal process" , International Journal of Material Research Volume :108 / / 2017

---

P. Sain, R.K. Goyal, A.K. Bhargava and Y.V. S. S. Prasad, "Electrical Properties of Single-Walled/Multi-Walled Carbon-Nanotubes Filled Polycarbonate Nanocomposites" , Journal of Electronic Materials Volume :46 / 458-466 / 2017

---

Brij Mohan Mundotiya, Dragan Dinulovic, Lutz Rissing, Marc C. Wurz, "Fabrication and characterization of a Ni-Fe-W core microtransformer for high-frequency power applications" , Sensors and Actuators A: Physical Volume :267 / 42-47 / 2017 ISBN: 0924-4247

---

R Sharma, H Lee, K Borse, V Gupta, AG Joshi, S Yoo, D Gupta, "Ga-doped ZnO as an electron transport layer for PffBT4T-2OD: PC70BM organic solar cells" , Organic Electronics Volume :43 / 207-213 / 2017

---

R. K. Sabat, D. Panda, and S. K. Sahoo, "Growth mechanism of extension twin variants during annealing of pure magnesium: An �ex situ� electron backscattered diffraction investigation" , Materials Characterization Volume :126 / 10 / 2017 ISBN: 1044-5803

---

RK Rai, JK Sahu, PSM Jena, SK Das, N Paulose, CD Fernando, "High temperature tensile deformation of a directionally solidified nickel base superalloy: Role of micro constituents" , Materials Science and Engineering: A Volume :705 / 189-195 / 2017

---

Abhishek Tripathi, S.V.S. Narayana Murty, P. Ramesh Narayanan, "Microstructure and texture evolution in AZ31 magnesium alloy during caliber rolling at different temperatures" , Journal of Magnesium and Alloys Volume :5 / 340-347 / 2017

---

Kaustubh Kambale, Rajendra Goyal, Sandeep Butee, Rohan Parsewar, Hanmant Gawade and Sameer Shroff, "Novel Polyacrylonitrile/Potassium Sodium Niobate Composites with Superior Dielectric and Thermal Properties" , Composites Communications Volume :5 / 8-12 / 2017

---

R. K. Sabat, S. K. Sahoo, D. Panda, U. K. Mohanty, and S. Suwas, "Orientation dependent recrystallization mechanism during static annealing of pure magnesium" , Materials Characterization Volume :132 / 388 / 2017 ISBN: 1044-5803

---

Akshaykumar,U.Pandel and M.K. Banerjee, "Production of Iron �Multiwall Carbon Nanotubes (CNT) Composite by Mechanical Alloying" , International Journal of Engineering Technology Science and Research Volume :4 / / 2017

---

PSM Jena, RK Rai, PK Roy, JK Sahu , "Role of internal oxidation and iron penta carbonyl formation on creep life of 9Cr-1Mo steel" , Materials at High Temperatures Volume :34 / 239-249 / 2017

---

K Borse, R Sharma, D Gupta, A Yella, "Simultaneous enhancement of light absorption and improved charge collection in PTB7-Th: PC70BM organic solar cells" , MRS Advancs Volume :2 / 835-840 / 2017

---

Anurag Hamilton, Ashok Sharma, UpenderPandel, "SOLID PARTICLE EROSION RESISTANCE OF HVAF-SPRAYED WC-10Co-4Cr COATING ON CA6NM STEEL" , Surface Review and Letters Volume :24 / 01-04 / 2017 ISBN: 10.1142

---

A. A. Thanki and R. K. Goyal, "Study on Effect of Cubic- and Tetragonal Phased BaTiO3 on the Electrical and Thermal Properties of Polymeric Nanocomposites" , Materials Chemistry and Physics Volume :183 / 447-456 / 2017

---

S.D. Gaikwad and R.K. Goyal, "Study on the effect of ball milling on dielectric and thermal behaviour of high performance polymer composites" , Nano Hybrids and Composites Volume :17 / 72-78 / 2017

---

D. Panda, P Bhuyan, L Kumar, and S. N. Alam, "Synthesis of Fe3Al Intermetallic Compound by Mechanical Alloying" , Arabian Journal for Science and Engineering Volume :42 / 4427 / 2017 ISBN: 2191-4281

---

Robin Gupta, Ashok Sharma, Upender Pandel and Lorenz Ratke, "Wear analysis of A356 alloy cast through rheometal process" , Materials Research Express Volume :4 / / 2017

---

M. J. Pawar, A. Patnaik, S.K. Biswas, U.Pandel, I.K. Bhat, S. Chatterjee, A.K. Mukhopadhyay, R. Banerjee, B.P. Babu, "Comparison of ballistic performances of Al2O3 and AlN ceramics" , International Journal of Impact Engineering Volume :98 / / 2016

---

S. Pendse, R. K. Goyal, "Disappearance of Curie Temperature of BaTiO3 Nanopowder Synthesised by High Energy Ball Mill" , Journal of Materials Science and Surface Engineering Volume :4 / 383-385 / 2016

---

Jyotirmaya Kar, S.K. Roy, G.G. Roy, "Effect of beam oscillation on electron beam welding of copper with AISI-304 stainless steel" , Journal of Materials Processing Technology Volume :233 / 174-185 / 2016

---

M.K. Mishra, A.G. Rao, R. Sarkar, B.P. Kashyap, N. Prabhu, "Effect of preaging deformation on aging characteristics of 2507 super duplex stainless steel" , Journal of Materials Engineering and Performance Volume :25 / 374-381 / 2016

---

C. Kale, P. Dhoka and R. K. Goyal , "Effect of Processing Routes on Electrical Properties of Polymer/Iron Composites " , Journal of Electronic Materials Volume :45 / 4148-4153 / 2016

---

Brij Mohan Mundotiya, Lutz Rissing, Marc Christopher Wurz, "Effect of substrate temperature on magnetic properties of electroplated 82Ni-15Fe-3W alloy films" , IEEE Transactions on Magnetics Volume :52 / 2003305 / 2016 ISBN: 0018-9464

---

K Borse, R Sharma, HP Sagar, PA Reddy, D Gupta, A Yella, "Efficient light trapping and interface engineering for performance enhancement in PTB7-Th: PC70BM organic solar cells" , Organic Electronics Volume :41 / 280-286 / 2016

---

A Gupta, R. K. Goyal, "Electrical properties of polycarbonate/ nickel composites prepared by a simple processing technique" , Journal of Materials Science and Surface Engineering Volume :4 / 351-354 / 2016

---

A. Tripathi, A. Tewari, A.K. Kanjarla, N. Srinivasan, G.M. Reddy, S.M. Zhu, J.F. Nie, R.D. Doherty and I. Samajdar, "Microstructural Evolution During Multi-Pass Friction Stir Processing of a Magnesium Alloy" , Metallurgical and Materials Transactions A Volume :47 / 2201-2216 / 2016

---

P.K. Sain, R. K. Goyal, Y.V.S.S. Prasad and A. K. Bhargava, "Polycarbonate based three-phase nanocomposite dielectrics" , Mater. Res. Express Volume :3 / 085016 / 2016 ISBN: 2053-1591/3/8/085

---

R.K. Singh, J.K. Sahu, S. Tarafder, "Strain Rate Effect on Cyclic Deformation Behaviour of Advanced Ultrasupercritical Boiler Grade Wrought Ni-Based Superalloy IN740H at 760°C" , Materials Science & Engineering A Volume :Volume 658 / 272-279 / 2016

---

A. Tripathi, I. Samajdar, J.F. Nie and A. Tewari, "Study of grain structure evolution during annealing of a twin-roll-cast Mg alloy" , Materials Characterization Volume :114 / 157-165 / 2016

---

S. D. Gaikwad, P. Dhoka, R. K. Goyal, "Study on high temperature poly(aryletherketon) (PAEK)/ iron composites prepared by powder metallurgy (P/M) route" , Transactions of PMAI Volume :42(2) / 51-57 / 2016

---

R. K. Goyal and R. Sulakhe, "Study on PVDF/Ni composites with low percolation" , Advanced Materials Letter Volume :6 / 309-317 / 2016

---

R. K. Goyal, P. Dhoka, A. Bora, P. Gaikwad, "Synthesis of iron nanopowder and its nanocomposites with high electrical conductivity and thermal stability" , Journal of Materials Science and Surface Engineering Volume :4(1) / 339-341 / 2016

---

Vandana Kaler, R. K. Duchaniya, and U. Pandel, "Synthesis of nano-titanium dioxide by sol-gel route" , AIP Conference Proceedings Volume :020127 / 1724 / 2016 ISBN: 978-0-7354-1371

---

R. K. Goyal, S.P. Deshpande, S.S. Singare, "Synthesis of ZrO2 nanopowder using high energy ball mill and characterization" , Journal of Materials Science and Surface Engineering Volume :4 / 360-363 / 2016

---

M. Joshi, A. Goyal, S. Patil and R. K. Goyal, "Tribological and Thermal Properties of Hexagonal Boron Nitride Filled High Performance Polymer Nanocomposites" , Journal of Applied Polymer Science Volume :133 / 44409 / 2016

---

Shrikant , A. K. Nayak, U. Pandel , R. K. Duchaniya, "Vibrational, Structural and Thermal studies of Debris of 30% CaO-70% B2O3" , Journal of Materials Science & Surface Engineering Volume :4 / / 2016

---

Shrikant, A. K. Nayak, U. Pandel, R. K. Duchaniya, "Vibrational, Structural and Thermal studies of Debris of 30%CaO-70%B2O3" , Journal of Materials Science & Surface Technology Volume :4 / 444-447 / 2016 ISBN: 2016

---

S . Sharma, S. Sangal and K. Mondal, "Wear Behavior of bainitic rail and wheel steels" , Mater. Sci. and Tech Volume :32 / 266-274 / 2016

---

R.K.Singh, D. Mandal, and K.L.Sahoo, "Comparison of Zn Loss in Traditional Brass Melting Furnace used by Brassware Artisans and Energy Efficient Brass Melting Furnace" , Indian Foundry Journal Volume :61 / 33-39 / 2015

---

M.Z. Bian, A. Tripathi, H. Yu, N.D. Nam and L.M. Yan, "Effect of aluminum content on the texture and mechanical behavior of Mg 1wt % Mn wrought magnesium alloys" , Materials Science and Engineering A Volume :639 / 320-326 / 2015

---

Nikitha Gade, Gaurav Verma, Rahul Sen, Upender Pandel, "Effect of Calcium Carbonate on Reduction Behavior on Mill Scale" , Procedia Earth and Planetary Science Volume :11 / / 2015

---

Jyotirmaya Kar, S. Mahanty, S.K. Roy, G.G. Roy, "Estimation of average spot diameter and bead penetration using process model during electron beam welding of AISI 304 stainless steel" , Transactions of The Indian Institute of Metals Volume :68 / 935-941 / 2015

---

P. K. Sain, R. K. Goyal, Y. V. S. S. Prasad, Jyoti, K. B. Sharma and A. K. Bhargava, "Few-Layer-Graphene/ Polycarbonate Nanocomposites as Dielectric and Conducting Material" , Journal of Applied Polymer Science Volume :132 / 42443 / 2015

---

A. Tripathi, A. Tewari, N. Srinivasan, G.M. Reddy, S.M. Zhu, J.F. Nie, R.D. Doherty and I. Samajdar, "Microstructural origin of friction stir processed zone in a magnesium alloy" , Metallurgical and Materials Transactions A Volume :46 / 3333-3336 / 2015

---

Rahul Sen, Satender Dehiya, Upender Pandel, M.K.Banerjee, "Utilization of Low Grade Coal for Direct Reduction of Mill Scale to Obtain Sponge Iron: Effect of Reduction Size time and Particle Size" , Procedia Earth and Planetary Science Volume :11 / / 2015

---

S . Sharma, S. Sangal and K. Mondal, "Wear behavior of newly developed bainitic wheel steels" , Journal of Materials Engineering and Performance Volume :24 / 999-1010 / 2015

---

S . Sharma, S. Sangal and K. Mondal, ", Influence of subsurface structure on the linear reciprocating sliding wear behavior of steels with different microstructures" , Metallurgical and Materials Transactions A Volume :45 / 6088-6102 / 2014

---

A.K. Pradhan and S. Das, "Dry sliding wear and friction behavior of Cu-SiC nanocomposite coating prepared by pulse reverse electrodeposition" , Tribology Transactions Volume :57 / 46-56 / 2014

---

MP Singh, RK Rai, C Srivastava , "Electrodeposition of Ag-Ni-Fe Nanowires" , ECS Electrochemistry Letters Volume :3 / 27-29 / 2014

---

Ashok Sharma, Upender Pandel, Vatsala Chaturvedi, "Energy efficiency in casting of magnesium alloys" , Indian Foundry Journal Volume :06 / 53- 56 / 2014

---

M. A. Kori, M. G. Kulthe, R. K. Goyal, "Influence of Cu Micro Particles on Mechanical Properties of Injection Molded Polypropylene/Cu Composites" , International Journal of Innovative Research in Science, Engineering and Technology Volume :3 / 14034-1404 / 2014

---

RK Rai, C Srivastava , "Nonequilibrium Microstructures for Ag–Ni Nanowires" , Microscopy and Microanalysis 21 (2), 491-497 Volume :21 / 491-497 / 2014

---

A.K. Pradhan and S. Das, "Pulse-reverse electrodeposition of Cu-SiC nanocomposite coating: Effect of concentration of SiC in the electrolyte" , Journal of alloys and compounds Volume :590 / 294-302 / 2014

---

A.K. Pradhan and S. Das, "Pulse-reverse electrodeposition of Cu-SiC nanocomposite coating: Effects of surfactants and deposition parameters" , Metallurgical and Materials Transactions A Volume :45 / 5708-5720 / 2014

---

S . Sharma, S. Sangal and K. Mondal, "Reciprocating sliding wear behavior of newly developed bainitic steels" , Metallurgical and Materials Transactions A Volume :45 / 5451-5468 / 2014

---

RK Rai, MP Singh, C Srivastava, "Synthesis and characterization of Ag–Co–Ni nanowires" , Journal of microscopy Volume :255 / 169-173 / 2014

---

P.K. Sain, R.K. Goyal, A.K. Bhargava and Y.V.S.S. Prasad, "Thermal and Dielectric Behaviour of Flexible Polycarbonate/lead Zirconate Titanate Composite System." , Journal of Applied Polymer Science Volume :131 / 39913-3399 / 2014

---

Materials Science and Engineering, "Thermal and Dielectric Properties of High Performance Polymer/ZnO Nanocomposites�" , Materials Science and Engineering Volume :64 / 012016 / 2014

---

R.K. Goyal, "Cost-efficient high performance polyetheretherketone/expanded graphite nanocomposites with high conductivity for EMI shielding application" , Materials Chemistry and Physics Volume :142 / 195-198 / 2013

---

R. K. Goyal, S. S. Katkade, D. M. Mule, "Dielectric, mechanical and thermal properties of polymer/BaTiO3 composites for embedded capacitor" , Composites Part B: Engineering Volume :44 / 128-132 / 2013

---

Chandan Srivastava, Brij Mohan Mundotiya, "Electron microscopy of microstructural transformation in electrodeposited Ni-rich, Ag-Ni film" , Thin Solid Films Volume :539 / 102-107 / 2013 ISBN: 0040-6090

---

R. K. Goyal, A. N. Tiwari, Y. S. Negi, "High Performance polymer/AlN composites for electronic substrate application" , Composites Part B: Engineering Volume :47 / 70-74 / 2013

---

S . Sharma, S. Sangal and K. Mondal, "On the optical microscopic method for determination of ball-on-flat surface linearly reciprocating sliding wear volume" , Wear Volume :300 / 82-89 / 2013

---

R.K. Goyal, K.A. Rokade, A.S. Kapadia, B. S. Selukar, B. Garnaik, "PEEK/SiO2 Composites with High Thermal Stability for Electronic Applications" , Electronic Materials Letter Volume :9 / 95-100 / 2013

---

Chandan Srivastava, Brij Mohan Mundotiya, "Size and solid solubility in electrodeposited Ag-Ni nanoparticles" , Materials Science Forum Volume :736 / 21-26 / 2013 ISBN: 0255-5476

---

R. K. Goyal and Aditi Kapadia, "Study on Phenyltrimethoxysilane Treated Nano-Silica Filled High Performance Poly(etheretherketone) Nanocomposites" , Composites Part B: Engineering Volume :50 / 135-143 / 2013

---

R. K. Goyal, M. Yadav, "Study on wear and friction behavior of graphite flake filled PTFE composites" , Journal of Applied Polymer Science Volume :127 / 3186-3191 / 2013

---

R. K. Goyal, M. Yadav, "The wear and friction behavior of Novel PTFE/expanded graphite nanocomposites for Tribology Application" , Journal of Tribology Volume :136 / 21601 / 2013

---

P.K. Sain, R.K. Goyal, A.K.Bhargava, Y.V.S.S. Prasad, "Thermal and Electronic Behaviour of Polycarbonate/Copper nanocomposites" , Journal of Physics D: Applied Physics Volume :46 / 455501 / 2013

---

C Srivastava, RK Rai , "Transmission electron microscopy study of Ni-rich, Ag–Ni nanowires" , Chemical Physics Letters Volume :575 / 91-96 / 2013

---

Brij Mohan Mundotiya, Chandan Srivastava, "Ag-Ni nanoparticles: synthesis and phase stability" , Electrochemical and Solid-State Letters Volume :15 / 41-44 / 2012 ISBN: 1099-0062

---

A. Misra, S . Sharma, S. Sangal, A. Upadhyaya, K. Mondal, "Critical isothermal temperature and optimum mechanical behavior of high Si containing bainitic steels" , Materials Science and Engineering A Volume :558 / 725-729 / 2012

---

R. K. Goyal, A. B. Kulkarni, "Electrical properties of novel three-phase polymer nanocomposites with high dielectric constant" , J Phys D: Applied Physics Volume :45 / 465302 / 2012

---

R.K. Goyal, A.N. Tiwari, Y.S. Negi,, "High performance PEEK/AlN micro- and nanocomposites for tribological application" , Journal of Applied Polymer Science Volume :124 / 4612-4619 / 2012

---

Chandan Srivastava, Brij Mohan Mundotiya, "Morphology dependence of Ag-Ni solid solubility" , Electrochemical and Solid-State Letters Volume :15 / 10 - 15 / 2012 ISBN: 1099-0062

---

Mathur, Y. B., Poonia, M. P., Pandel, U., Singh, R., "Performance and Emission Characteristics of Diesel Engine Using Low Concentration Thumba Oil Diesel Blends" , International Journal of Wind and Renewable Energy Volume :1 / 108-113 / 2012

---

A. Mierczynska, A. Michelmore, A. Tripathi, R.V. Goreham, R. Sedeva and K. Vasilev, "pH-tunable gradients of wettability and surface potential" , Soft Matter Volume :8 / 8399-8404 / 2012

---

V. N. Nadakuduru, D. L. Zhang, P. Cao, B. Gabbitas,, Y. L. Chiu, "Tensile Properties and Fracture Behaviour of an Ultrafine Grained Ti-47Al-2Cr (at %) Alloy at Room and Elevated Temperatures " , Journal of Materials Science Volume :47 / 1223 / 2012

---

R. K. Goyal, M. Kulthe, "The effect of ball milling timing on electrical properties of PVC/Cu composites" , Advanced Materials Letters Volume :3 / 246-249 / 2012

---

Sharma Ashok ,Sharma Nikhil, Pandel U, "Aluminium Scrap Recycling: Environmentally Benign Process" , Alucast Journal Volume :74 / 24-29 / 2011

---

Poonia M.P, Bhardwaj A, Jethoo A.S and Pandel U, "Design and Development of Energy Efficient Multi-Utility Desert Cooler" , Universal Journal of Environment Research and Technology Volume :1 / 39-44 / 2011

---

S . Sharma, S. Sangal and K. Mondal, "Development of new high strength carbide free bainitic steels" , Metallurgical and Materials Transactions A Volume :42 / 3921-3933 / 2011

---

M.P. Poonia, A. Bhardwaj, A.S. Jethoo, and U. Pandel, "Experimental Investigation on Engine Performance ND Exhaust Emission in an LPG Diesel Dual Fuel Engine" , International Journal of Environment Science and Development Volume :02 / 418-422 / 2011

---

Awadesh Kumar, M.P. Poonia, Upender Pandel and Jethoo A.S., "FMEA: Meyhodology, Design and Implementation in a Foundry" , IJEST Volume :3 / 5288-5297 / 2011

---

R.K. Goyal, A.N. Tiwari, Y.S. Negi,, "High performance PEEK/AlN micro- and nanocomposites for tribological application" , Journal of Applied Polymer Science Volume :124 / 4612-4619 / 2011

---

Joshi, A.N. Tiwari, R.K. Goyal,, "Improvement in thermal, mechanical and water resistance properties of epoxy/glass particulate composites" , Int J Plast Technol Volume :14 / 167-178 / 2011

---

V N Nadakuduru, D L Zhang, S Raynova, P Cao, B Gabbitas , "Mechanical Behaviour of Titanium, Ti-6Al-4V (wt %) Alloy and Ti-47Al-2Cr (at %) Alloy Produced using Powder Compact Forging " , Advanced Material Research Volume :275 / 186 / 2011

---

R. K. Goyal, K.R. Kambale, S. S. Nene, S. Sudhir, U. P. Mulik, "Mechanical, thermal and electrical properties of high performance polymer/copper composites" , Materials Chemistry and Physics Volume :128 / 114-120 / 2011

---

R. K. Goyal, P. Jadhav, A.N. Tiwari, "Preparation and properties of new polyphenylene sulphide/AlN composites for electronics applications packaging" , Journal of Electronic Materials Volume :40 / 1377-1383 / 2011

---

R.K. Goyal, A.N. Tiwari, Y.S. Negi,, "Role of interface on dynamic modulus of high performance PEEK/ceramic composites" , Journal of Applied Polymer Science. Volume :121 / 436-444 / 2011

---

M. S. Sureshkumar, R. K. Goyal, YS Negi, A. Pratheepkumar, K. Raghunatha Reddy, R. P. Singh, J. W. Dadge and R. C. Aiyer, "Studies on the feasibility of recycled polystyrene doped with NLO activemeta-Nitroaniline for optoelectronics applications" , Polymers Advanced Technologies Volume :22 / 1865-1871 / 2011

---

V. Balaji, A.N. Tiwari, R.K. Goyal,, "Study on high performance PEEK/Si3N4 nanocomposites: New electronic substrate materials" , Polymer Engineering and Science Volume :51 / 509-517 / 2011

---

Stiliana Raynova, Deliang Zhang, Dorothee Polo, Laurent Gonthier, William Egea and Vijay Nadakuduru , "Tensile Properties and Fracture Behaviour of Induction Sintered Ti and Ti-6Al-4V(wt%) Powder Compacts " , Advanced Material Research Volume :275 / 196 / 2011

---

V. N. Nadakuduru, D. L. Zhang, P. Cao, Y. L. Chiu, B. Gabbitas, "The Mechanical Behaviour of an Ultrafine Grained Ti-47Al-2Cr (at%) Alloy in Tension and Compression and at Different Temperatures" , Materials Science and Engineering A Volume :528 / 4592 / 2011

---

R. K. Goyal, S. D. Samant, A. K. Thakar, A. Kadam, "Electrical properties of polymer/ expanded graphite nanocomposites with low percolation" , Journal of Physics D:Applied Physics Volume :43 / 365404 / 2010

---

V. Balaji, A.N. Tiwari, R.K. Goyal, "Fabrication and properties of high performance PEEK/Si3N4 nanocomposites" , Journal of Applied Polymer Science Volume :119 / 311-318 / 2010

---

R. K. Goyal, J N Sahu, "Fabrication of advanced poly(etheretherketone)/clay nanocomposites and their properties" , Advanced Materials Letter Volume :1 / 205-209 / 2010

---

R. K. Goyal, A. Kadam, "Polyphenylene sulphide/graphite composites for EMI shielding applications" , Advanced Materials Letter Volume :1 / 143-147 / 2010

---

R.K. Goyal, S.R. Damkale, U.P. Mulik, Y.S. Negi, J. W. Dadge, R.C. Aiyer, "SHG relaxation behaviour in m-nitroaniline doped PMMA guest-host system" , Advanced Materials Letter Volume :1 / 264-268 / 2010

---

Deliang Zhang, Stiliana Raynova, Vijay Nadakuduru, Peng Cao, Brian Gabbitas, Barry Robinson, "Consolidation of Titanium and Ti-6Al-4V Alloy Powders by Powder Compact Forging " , Materials Science Forum Volume :618 / 513 / 2009

---

A.K. Pradhan, S.P. Gupta and K. Mondal , "Effect of Zn concentration on diffusion induced grain boundary migration in Cu – Zn system " , Transactions of The Indian Institute of Metals Volume :62 / 233-239 / 2009

---

Vijay. N. Nadakuduru, Deliang Zhang, Peng Cao and Brian Gabbitas, "Microstructures and Mechanical Properties of Ultrafine grained Ti-47Al-2Cr (at %) alloy produced using Powder Compact Forging" , International Journal of Modern Physics B Volume :23 / 1739 / 2009

---

Deliang Zhang, Aamir Mukhtar, Vijay N. Nadakuduru, Stiliana Raynova, "The possibility of Synthesizing bulk nanostructured or ultrafine structured metallic materials by consolidation of powders using high strain powder compact forging" , International Journal of Materials Research (formerly Z. Metallkd) Volume :100 / 1720 / 2009

---

R.K. Goyal, "Thermal, mechanical and dielectric properties of high performance PEEK/AlN nanocomposites" , Journal of Nanoscience and Nanotechnology Volume :9 / 6902-6909 / 2009

---

Vijay Nadakuduru, DeliangZhang, PengCao ,BrianGabbitas , "Thermomechanical Consolidation of Ti/Al/Cr Composite (Composition: Ti-47Al-2Cr (at %)) Powders. " , Materials Science Forum Volume :618 / 501 / 2009

---

R.K. Goyal, A.N. Tiwari, Y.S. Negi, "High performance nanocomposites for tribological applications: preparation and characterization" , Materials Science and Engineering A Volume :486 / 602-610 / 2008

---

R.K. Goyal, A.N. Tiwari, Y.S. Negi, "Microhardness of PEEK/ ceramic micro- and nanocomposites: Correlation with Halpin-Tsai model" , Materials Science and Engineering A Volume :491 / 230-236 / 2008

---

M.S. Sureshkumar, R.K. Goyal, Y.S. Negi, "Potential applications of Polystyrene in optoelectronics" , Progress in Rubber, Plastics and Recycling Technology Volume :24 / 53-72 / 2008

---

R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi, "Study on microhardness, dynamic mechanical and tribological properties of PEEK/Al2O3 composites" , Journal of Applied Polymer Science Volume :110 / 3379-3387 / 2008

---

R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi, "Thermal expansion behavior of high performance PEEK matrix composites" , Journal of Physics D: Applied Physics Volume :41 / 85403 / 2008

---

R.K. Goyal, P.A. Jagdale, U.P. Mulik,, "Thermal, mechanical, and dielectric properties of Polystyrene/ expanded graphite nanocomposites," , Journal of Applied Polymer Science Volume :111 / 2071- 2077 / 2008

---

R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi, "Dynamic mechanical properties of Al2O3/ Poly(ether ether ketone) composites" , Journal of Applied Polymer Science Volume :104 / 568-575 / 2007

---

R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi, "Effect of aluminum nitride on thermo mechanical properties of high performance PEEK" , Composites Part A: Applied Science & Manufacturing Volume :38 / 516-524 / 2007

---

R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi, "Novel high performance Al2O3/Poly(ether-ether-ketone) nanocomposites for electronics applications" , Composites Science and Technology Volume :67 / 1802-1812 / 2007

---

Nadakuduru. V Cao. P Zhang. D Gabbitas. B, "Ultrafine grained Ti-47Al-2Cr (at %) alloy prepared by high energy mechanical milling and hot Isostatic pressing" , Advanced Materials Research Volume :29 / 139 / 2007

---

R.K. Goyal, A.N. Tiwari, U.P. Mulik, Y.S. Negi, "Anisotropic linear thermal expansivity of Poly(ether-ether-ketone)" , European Polymer Journal Volume :42 / 2888-2896 / 2006

---

R.K. Goyal, Y.S. Negi, A.N. Tiwari, "High performance polymer composites on PEEK reinforced with Aluminum oxide" , Journal of Applied Polymer Science Volume :100 / 4623-4631 / 2006

---

R.K. Goyal, A.N. Tiwari, Y.S. Negi, "Preparation of high performance composites based on Aluminum nitride/ Poly(ether-ether-ketone) and their properties" , European Polymer Journal Volume :41 / 2034-2044 / 2005

---

Ashok Sharma , D.B. Goel ,U.Pandel, "Properties and performance of continuous casting mould fluxes" , Indian Foundry Journal Volume :1 / 81-85 / 2005

---

Ashok Sharma, D.B. Goel, U.Pandel, "Study on the effect of vibrations during solidification on cast Al-Si alloys" , Indian Foundry Journal Volume :3 / 42-45 / 2005

---

R.K. Goyal, S.R. Damkale, P.V. Adhyapak, M. Islam, R.C. Aiyer, Y.S. Negi, "Preparation and investigation of second harmonic generation (SHG) properties of m-Nitroaniline doped PMMA guest-host system for optoelectronic device applications" , International Journal of Plastics Technology Volume :8 / 249-255 / 2004

---

P.V. Adhyapak S.R. Damkale, R.K. Goyal, Y. S. Negi, M. Islam, R.C. Aiyer, "Preparation of novel optical grade m-Nitroaniline and PMMA coated single crystals and their optical properties," , Materials Letters Volume :58 / 3929-3932 / 2004

---

Y.S. Negi, R.K. Goyal, "Development of thermotropic liquid crystalline polymers and their applications (Review Article)." , International Journal of Plastics Technology Volume :7 / 99-118 / 2003

---

Y.S. Negi, R.K. Goyal, "Recent development of acrylic polymer coating for corrosion control and electronics applications" , Molecular Materials Volume :14 / 103-120 / 2001

---